“A new recontruction algorithm for use with capacitance-based tomography”
Authors: Ø. Isaksen and J.E. Nordtvedt,Affiliation: University of Bergen, Christian Michelsen Research and International Research Institute of Stavanger (IRIS)
Reference: 1994, Vol 15, No 1, pp. 9-21.
Keywords: Process measurements, multiphase flow, tomography
Abstract: A new reconstruction algorithm for use with capacitance-based process tomography is proposed. A numerical simulator, capable of calculating the capacitances for a particular sensor configuration and flow regime is used together with a parameter representation of the dielectric distribution and an optimization algorithm. The algorithm calculates these parameters and hence the dielectric distribution, by minimizing a function defined as a weighted sum of square differences between the measured and estimated capacitances. The method is tested by using both synthetic and experimental data, and the results are compared with results from the commonly used Linear Back Projection (LBP) algorithm. The method is capable of obtaining the correct parameter values for all the flow regimes tested, and does provide a better estimate than the LBP method. The method proves to be very promising, and is a step towards quantitative capacitance tomography.
PDF (2011 Kb)
DOI: 10.4173/mic.1994.1.2DOI forward links to this article:
| [1] Trevor York (2001), doi:10.1117/1.1377308 |
| [2] Trevor York (2004), doi:10.1201/9781420034462.ch10 |
| [3] H S Tapp, E K Kemsley, R H Wilson and M L Holley (1998), doi:10.1088/0957-0233/9/4/006 |
| [4] O Isaksen, A S Dico and E A Hammer (1994), doi:10.1088/0957-0233/5/10/011 |
| [5] Øyvind Isaksen (1996), doi:10.1088/0957-0233/7/3/013 |
| [6] R.M West, X Jia and R.A Williams (2000), doi:10.1016/S1385-8947(99)00137-0 |
| [7] Marco Antonio Rodriguez-Frias and Wuqiang Yang (2019), doi:10.1109/JSEN.2019.2899210 |
[1] AGA, M. (1991). Using the Levenberg-Marquardt Algorithm and the B-spline Representation to Determine the Characteristic Properties of the Porous Medium, MSc Thesis. University of Bergen, Norway.
[2] GILL, P.E., MURRAY, W., WRIGHT, M.H. (1981). Practical Optimization, London, Academic Press.
[3] HUANG, S.M., PLASKOWSKI, A.B., XIE, C.G. BECK, M.S. (1989). Tomographic imaging of two-component flow using capacitance sensors, J. Phys. E: Sci. Instrum., 22, 173-177 doi:10.1088/0022-3735/22/3/009
[4] ISAKSEN, O. (1989). Imaging Two-component Pipe Flow by Capacitance Sensors, MSc Thesis, University of Bergen, Norway.
[5] ISAKSEN, Ø. NORDTVEDT, J.E. (1992). Capacitance Tomography: Reconstruction Based on Optimization Theory, Presented at the 1st European Concerted Action on Process Tomography (ECAPT) conference, 26-29 March, Manchester, UK. Tomographic Techniques for Process Design and Operation (Computational Mechanics Publication), 213-224.
[6] NORDTVEDT, J.E., MEJIA, G., YANG, P. WATSON, A.T. (1991). Estimation of Capillary Pressure and Relative Permeability Functions From Centrifuge Experiments, Paper Society of Petroleum Engineers (SPE) 20805 accepted for publication in SPE Reservoir Engineering (SPERE).
[7] WATSON, A.T., KERIG, P.D., RICHMOND, P.C. TAO, T.M. (1988). A Regression-Based Method for Estimating Relative Permeabilities From Displacement Experiments, SPERE.March 1988, 3.
[8] XIE, C.G., HUANG, S.M., HOYLE, B.S. BECK, M.S. (1991). Tomographic imaging of industrial equipment - development of system model and image reconstruction algorithm for capacitive tomography, Reviewed Proceedings of the 5th Conference on Sensors and Their Applications.Bristol: Adam Hilgar, 203-208.
[9] XIE, C.G., HUANG, S.M., HOYLE, B.S., THORN, R., LENN, C. BECK, M.S. (1992). Electrical Capacitance Tomography for Flow Imaging - System model for development of reconstruction algorithms and design of primary sensors, IEE Proceedings G, 139, 89-98.
BibTeX:
@article{MIC-1994-1-2,
title={{A new recontruction algorithm for use with capacitance-based tomography}},
author={Isaksen, Ø. and Nordtvedt, J.E.},
journal={Modeling, Identification and Control},
volume={15},
number={1},
pages={9--21},
year={1994},
doi={10.4173/mic.1994.1.2},
publisher={Norwegian Society of Automatic Control}
};