“A field study of the industrial modeling process”
Authors: Bjarne A. Foss, B. Lohmann and W. Marquardt,Affiliation: NTNU, Department of Engineering Cybernetics and RWTH Aachen
Reference: 1998, Vol 19, No 3, pp. 153-174.
Keywords: Predictive control, hybrid control, logic design
Abstract: This paper analyzes the modeling process by means of a field study in the chemical industries. A diversified set of experienced modelers from two different countries have been interviewed using a case study approach. The interviews focussed on the modeling process. Other issues like life-cycle perspectives and the use of modeling in the process industries were treated as well. The information has been summarized and presented in a structured manner imposing the least possible bias from the authors. Based on the interview information the modeling process is discussed in detail. Further, fundamental research issues are identified, and a research agenda is proposed.
PDF (3887 Kb)
DOI: 10.4173/mic.1998.3.3DOI forward links to this article:
| [1] Ralph Schneider and Wolfgang Marquardt (2002), doi:10.1016/S0009-2509(02)00075-1 |
| [2] Zahra Eghtesadi and Kimberley B. Mcauley (2014), doi:10.1021/ie5002444 |
| [3] David J. Murray-Smith (2015), doi:10.1007/978-3-319-15099-4_8 |
| [4] David J. Murray-Smith (2015), doi:10.1007/978-3-319-15099-4_1 |
[1] ADLER, R.M. (1995). Emerging standards for component software, IEEE Computer, 28, 68-77.
[2] ARIS, R. (1991). Manners makyth modellers, Trans. IChemE, 69, 165-174.
[3] BARTON, P.I. PANTELIDES, C.C. (1994). Modeling of combined discrete/continuous processes, AICHE J, 40, 966-979 doi:10.1002/aic.690400608
[4] BOGUSCH, R., LOHMANN, B. MARQUARDT, W. (1996). Computer-aided process modeling with MODKIT, In: Proc. Chemputers Europe III. McGraw Hill, Frankfurt.
[5] BRÜLL, L., HUBBUCH, F. QUEST, S. (1997). Process simulation on heterogeneous networks, Computers chem. Engng. Submitted for publication.
[6] CARROLL, J.M. (1995). Scenario-Based Design, Wiley, New York.
[7] CURTIS, B., KRASNER, H. ISCOE, N. (1988). A field study of the software design process for large systems, Communications of the ACM, 31, 1268-1287 doi:10.1145/50087.50089
[8] DENN, M.M. (1985). Process Modeling, Longman, New York.
[9] DÖMGES, R., POHL, K., JARKE, M., LOHMANN, B. MARQUARDT, W. (1996). PRO-ART/CE - An environment for managing the evolution of chemical process simulation models, In: Proc. 10th European Simulation Multiconference.A. Javor, A. Lehmann and I. Molnar, Eds., pp. 1012-1017. Society for Computer Simulation International Budapest.
[10] DRENGSTIG, T., WASBØ, S. FOSS, B.A. (1997). A formal graphical based process modeling methodology, Computers chem. Engng, 21, S835-S840.
[11] ELMQVIST, H., JEANDEL, A., MATTSON, S.E., SAHLIM, P. OTTER, M. (1997). Modelica - language design for multi-formalism modeling, ESPRIT Project Simulation in Europe Basic Research Working Group, http://www.Dynasim.se/Modelica/.
[12] FINKELSTEIN, A., KRAMER, J. NUSEIBEH , B. (1994). Software Process Modeling and Technology, Wiley, New York.
[13] GAWTHROP, P. SMITH, L. (1996). Metamodelling: Bond Graphs and Dynamic Systems, Prentice Hall, London.
[14] HAMMER, M. CHAMPY, J. (1995). Business Reengineering, Campus, Frankfurt.
[15] JARKE, M. MARQUARDT, W. (1996). Design and evaluation of computer-aided process modeling tools, In. Proc. 1st Int. Conf. on Intelligent Systems in Process Engng ISP´95. AICHE Symposium Series No. 312.J.F. Davis, G. Stephanopoulos and V. Venkatasubramaniam, Eds., Vol. 92, pp. 97-109. CACHE Publications, Danvers, MA.
[16] JOHANSEN, T. A. FOSS, B. A. (1997). Operating regime based process modelling and identification, Computers chem. Engng, 21, 159-176.
[17] KING, J.M.P. BANARES-ALCANTARA, R. (1996). The extension and evolution of the process design representation, Computers chem. Engng, 20, S171-S176.
[18] KOLODNER, J. (1993). Case-Based Reasoning, Morgan Kaufman, San Mateo, CA.
[19] KRÖNER, A., HOTS, P., MARQUARDT, W. GILLES, E.D. (1990). DIVA - An open architecture for dynamic simulation, Computers chem. Engng, 14, 1289-1295.
[20] LJUNG, L. (1987). System Identification: Theory for the User, Prentice-Hall, Englewood Cliffs, NJ.
[21] LJUNG, L. (1997). Nonlinear black-box models in system identification, In: Preprints Int. Symp. on Advanced Control of Chemical Processes ADCHEM´97. Banff, Canada, pp. 1-12.
[22] LOHMANN, B. MARQUARDT, W. (1996). On the systemization of the process of model development, Computers chem. Engng, 20, S213-S218.
[23] MARQUARDT W. (1991). Dynamic process simulation - recent trends and future challenges, In: Chemical Process Control CPC-IV.Y. Arkun and W.H. Ray, Eds., pp. 131-180. CACHE Publications, New York.
[24] MARQUARDT. W. (1996). Trends in computer-aided modeling, Computers chem. Engng, 20.
[25] McKAY, A., BLOOR, M.S. DE PENNINGTON, A. (1996). A framework for product data, IEEE Trans. on Knowledge and Data Engng, 8,825-838 doi:10.1109/69.542033
[26] OAKLAND, J.S. (1989). Total quality management, In: Proc. 2nd Int. Conf. on Total Quality Management, pp. 3-17. Cotswold Press.
[27] PANTELIDES, C.C. (1988). Speedup - recent advances in process simulation, Computers chem. Engng, 12,745-755.
[28] PANTELIDES, C.C. BRITT, H.I. (1994). Multi-purpose process modeling environments, In: Foundations Computer-Aided Design Conf. FOCAPD´94, pp. 128-141. CACHE Publications, Snowmass, CO.
[29] POHL, K. (1996). Process Control Requirements Engineering, Wiley, New York.
[30] PONTON, J. (1995). Process systems engineering: Halfway through the first century, Chemical Engn. Sci., 50(24), 4045-4059 doi:10.1016/0009-2509(96)81832-X
[31] SPURR, K., LAYZELL, P., JENNISON, L. RICHARDS, N. (1994). Computer Supported Cooperative Work, Wiley, New York.
[32] STEPHANOPOULOS, G., HENNING, G. LEONE, H. (1990). Modelica: A language for process engineering, Part I and II, Computers chem. Engng, 14, 813-869.
[33] WESTERBERG, A. (1996). Distributed and collaborative computer-aided environments in process engineering design, In: Proc. 1st Int. Conf on Intelligent Systems in Process Engng ISPE´95. AICHE Symposium Series No. 312.J.F. Davis, G. Stephanopoulos, Eds, Vol. 92, pp. 184-194. CACHE Publications, Danvers, MA.
[34] WESTERBERG, A., SUBRAHMANIAM, E., REICH, Y, KONDA, S. n-dim group (1997). Designing the process design process, Computers chem. Engng, 21, SI-S9.
[35] YIN, R.K. (1984). Case Study Research - Design and Methods, Sage Publications, London.
BibTeX:
@article{MIC-1998-3-3,
title={{A field study of the industrial modeling process}},
author={Foss, Bjarne A. and Lohmann, B. and Marquardt, W.},
journal={Modeling, Identification and Control},
volume={19},
number={3},
pages={153--174},
year={1998},
doi={10.4173/mic.1998.3.3},
publisher={Norwegian Society of Automatic Control}
};